Medium Pressure No-Skive Hoses - EN 853 2SN - ISO 1436 - 301SN
Category: Hydraulic Hose
Specifications
Hose Cover Type
Standard
Weight
0.52 lb/ft, 0.77 kg/m
Media
Air, Coolants (Glycol, Coolants (Glycol),
Fuels - Check fuel type with our
catalogue chart., Lubricants (Oils),
Petroleum Hydraulic Fluids, Water
Specifications Met
EN 853, Type 2SN, ISO 1436, Type 2, SAE
100R2, Type AT
Compatible Fitting
48 Series
Inside Diameter
5/8 inch, 15.9 mm
Maximum Operating Temperature
100 °C (Water 85°C / Air 70°C), 212 °F
(Water 185°F / Air 158°F)
Hose Reinforcement Materia
2 Braids of High Tensile Wire
Hose Outside Diameter
1 inch, 25.4 mm
Division
Polymer Hose Division Europe
Industry
Industrial Manufacturing Equipment, Off-
road Machinery
Application
Medium Pressure Hydraulics
Technology:
Fluid & Gas Handling
Product Type
Hydraulic Hose
Product Style
No-Skive 2TE
Maximum Operating Pressure
3600 psi, 25 MPa, 250 bar
Hose I.D. (size)
-10
Minimum Bend Radius
200 mm, 7.874 inch
Design Factor
4:1
Minimum Operating Temperature
-40 °C
Materials of Construction
Rubber
Cover Material
Synthetic Rubber
Hose Inner Tube Material
Nitrile Butadiene Rubber (NBR)
Details
Parker's Medium Pressure No-Skive hose 301SN according to EN 853 2SN-ISO 1436 Type 2 with the No-Skive thin cover hose construction is
the ideal hose range for general medium pressure hydraulic applications. This hose offers extended fluid compatibility and is developed for all
general medium pressure hydraulic applications.
Markets:
• Construction Equipment
• Injection Moulding
• Forestry and Agriculture
• Materials Handling
• Pulp and Paper
Features/Benefits:
• Matched hose and fitting system guarantees an approved and safe combination and the highest quality and safety,
combined with the longest service life of the final product to the end-users.
High quality compounds allow thin cover hose construction.
• Complete No-Skive fitting technology across the full range of medium pressure hoses providing simpler, quicker and
safer hose assembly.
•
Nitrile inner tube offers extended fluid compatibility.
The Parker Medium Pressure hose range is complemented by a full selection of compatible No-Skive fittings in steel
and stainless steel.
Applications:
• General medium pressure hydraulic applications
Parker's Medium Pressures Hose 301SN is compatible with the Parker Parkrimp medium pressure fitting series 48.
View more about Medium Pressure No-Skive Hoses - EN 853 2SN - ISO 1436 - 301SN on main site